RCF TTS 15-A 15-Inch Active Subwoofer

RCF TTS 15-A 15-Inch Active Subwoofer

A powered subwoofer for low-frequency reinforcement alongside TT+ two-way touring loudspeakers. Its single fifteen-inch driver is driven by an internal Class D amplifier. Cabinet fittings support horizontal or vertical placement, with M20 mounting provisions on the top and side.

The specified frequency response is 40 Hz – 400 Hz. Maximum sound pressure level at one metre is 134 dB. Total Power is 2200 W Peak, 1100 W RMS. Woofer is 1 x 15'', 3.0'' v.c. Input signal is bal/unbal.

Input connectors are XLR, RDNet Ethercon. Output connectors are XLR, RDNet Ethercon. Controls are Gain, Eq, Prest Switch, Out Delay. RDNet is Onboard. The construction uses baltic birch plywood. Hardware is 2 x M20. Height is 600 mm / 23.62 inches. Width is 445 mm / 17.52 inches. Depth is 633 mm / 24.92 inches. The specified net weight is 36.5 kg.

The active design combines the transducers, amplifier sections and signal processing within the loudspeaker system. Coverage and placement should be considered together when planning the listening area. The specified acoustic pattern describes the nominal dispersion, while the room, cabinet position and operating level influence how the completed system serves the audience or performers.

Plan the input signal, mains connection and any network control alongside the physical placement of the cabinet. Keep the exact model reference in the system equipment list, especially when several related speakers have different transducers or coverage patterns. The integrated amplification arrangement is part of this model and should guide the intended system connection and operating setup.

Features of TTS 15-A

• Frequency Response: 40 Hz – 400 Hz
• Max SPL @ 1m: 134 dB
• Woofer: 1 x 15'', 3.0'' v.c
• Input connectors: XLR, RDNet Ethercon
• RDNet: Onboard
• Total Power: 2200 W Peak, 1100 W RMS

Specifications of TTS 15-A