RCF CBL 002 0.7m P-COM 8 Loudspeaker Cable

RCF CBL 002 0.7m P-COM 8 Loudspeaker Cable

The RCF CBL 002 is a short P-COM eight-pole loudspeaker cable for linking compatible GTX modules. Its 0.7-metre length suits the specified inter-module connection arrangement. The cable contains eight conductors with a cross-section of 2.5 square millimetres, corresponding to the published fourteen-AWG specification.

The manufacturer lists low electrical resistance and high flexibility as design characteristics. Gold-coated contacts and IP68 protection are also specified for this model. These details relate to a dedicated speaker-system cable, used with the corresponding P-COM connection format and the amplifier routing defined for the compatible GTX system. The conductor arrangement and connector standard remain the defining electrical details of the assembly.

A multipole connection brings the loudspeaker cable conductors into one connector system. It simplifies the physical interface in a compatible array while preserving the need to assign amplifier channels correctly. GTX and GTS configurations use different transducer and amplification arrangements, so the complete routing should correspond to the selected loudspeaker module and system design.

The cable route should be considered alongside the rack position and the loudspeaker layout. Allow the connection points to remain accessible when preparing the system, and select the appropriate cable model for each run. The published conductor specification and connector format identify this assembly within the compatible speaker-system cable range.

For deployment, match the P-COM connection with the corresponding rack output or module connection and follow the system wiring instructions. Keep the cable associated with its model designation when preparing inter-module links and rack feeds. This helps distinguish the intended assembly from S-COM signal cables, SpeakON fanouts and other visually similar professional audio accessories.

Features of CBL 002

• P-COM 8-pole loudspeaker connection
• 8 x 2.5 mm² (14 AWG) conductor specification
• High flexibility
• Low electrical resistance
• IP68 protection
• Gold-coated contacts

Specifications of CBL 002