RCF CBL99102 4/6/8/10m P-COM 8 to Four NL2 Fanout

RCF CBL99102 4/6/8/10m P-COM 8 to Four NL2 Fanout

The RCF CBL99102 is a P-COM eight-pole to four-NL2 fanout cable for compatible GT and other mono-amplified modules connected to a TTR 16K power rack. The male P-COM connector branches into four NL2 SpeakON cables with lengths of four, six, eight and ten metres.

The staggered branches provide different routing distances within one fanout assembly. A separate male-to-female P-COM extension cable is required to complete the connection described by the manufacturer. Its specific branch lengths distinguish this model from the equal-length ten-metre version of the four-NL2 adapter.

The connector and branch arrangement determines the physical role of this assembly in the speaker system. A common connection is brought out to the specified individual branches, allowing each termination to be routed to its corresponding connection point. The amplifier channel assignment must match the intended loudspeaker arrangement and the relevant system wiring instructions.

Branch length is part of the cable selection, particularly when the connected modules occupy different positions. Consider the complete route, including any separate extension specified for the system, when planning the rack and speaker layout. The adapter model identifies a particular termination arrangement, so related cables should be checked individually rather than selected by appearance alone.

During preparation, identify the connection at each end and follow the compatible equipment instructions for the intended channel routing. Keep the cable reference with the system equipment schedule to distinguish equal-length fanouts, staggered branches and reverse connector-gender versions. This preserves the intended physical connection arrangement when several types of speaker cable are deployed together.

Features of CBL99102

• Male P-COM 8 connector
• Four NL2 SpeakON branches
• Staggered 4 m, 6 m, 8 m and 10 m lengths
• For compatible GT/mono-amplified modules
• Separate P-COM extension cable required

Specifications of CBL99102