RCF GTX 12 Three-Way Line Array Module

RCF GTX 12 Three-Way Line Array Module

A three-way line array module for large touring systems and demanding permanent installations. Its eight neodymium transducers comprise two twelve-inch woofers, four midrange units and two compression drivers. A ninety-by-ten-degree waveguide controls coverage, with separate amplification paths for the frequency sections.

The specified frequency response at -10 dB is 35 Hz – 20000 Hz. Maximum sound pressure level at one metre is 148 dB. Nominal horizontal coverage is 90°. Nominal vertical coverage is 10°. Amplification is Quad-amp. Nominal Impedance LF is 8 ohm. Nominal Impedance LF2 is 8 ohm. Nominal Impedance MF is 8 ohm.

Input connectors are P-COM 8POLE. Output connectors are P-COM 8POLE. The construction uses birch plywood. Hardware is Array fittings. Height is 366 mm / 14.41 inches. Width is 1177.5 mm / 46.36 inches. Depth is 540.6 mm / 21.28 inches. The specified net weight is 64.2 kg.

This loudspeaker is intended to work within a system using compatible external amplification and processing. Match the amplifier routing and operating arrangement to the model rather than assuming that related cabinets use identical settings. The transducer configuration and connection format are part of the system design, alongside the intended coverage and deployment geometry.

Position and aim the cabinet according to the required listening area and the complete system design. Where several modules are combined, the array configuration and processing must be considered together. Keep the exact model reference with the equipment schedule so that the selected amplifier setup, mechanical accessories and connection arrangement remain consistent with this loudspeaker.

Features of GTX 12

• Frequency Response (-10dB): 35 Hz – 20000 Hz
• Max SPL @ 1m: 148 dB
• Horizontal coverage angle: 90°
• Vertical coverage angle: 10°
• Amplification: Quad-amp
• Woofer: 2 x 12'' neo, 3.5'' v.c
• Input connectors: P-COM 8POLE

Specifications of GTX 12