RCF GTX 10Pi 70-Degree Installation Line Array Module

RCF GTX 10Pi 70-Degree Installation Line Array Module

A two-way installation line array module with seventy-degree horizontal coverage and fifteen-degree vertical coverage. It uses two ten-inch neodymium woofers and a compression driver. The installation cabinet includes array fittings and screw-terminal connections for integration into a compatible externally amplified system.

The specified frequency response at -10 dB is 42 Hz – 20000 Hz. Nominal horizontal coverage is 70°. Nominal vertical coverage is 15°. Amplification is Bi-Amp. Nominal Impedance LF is 8 ohm. Nominal Impedance HF is 8 ohm. Recommended Amplifiers are XPS 16K, XPS 16KD. Compression Driver is 1 x 1.4'' neo, 4.0'' v.c.

Input connectors are Screw Terminals. Output connectors are Screw Terminals. The construction uses birch plywood. Hardware is Array fittings. Height is 337 mm / 13.27 inches. Width is 750 mm / 29.53 inches. Depth is 482.3 mm / 18.99 inches. The specified net weight is 32 kg.

This loudspeaker is intended to work within a system using compatible external amplification and processing. Match the amplifier routing and operating arrangement to the model rather than assuming that related cabinets use identical settings. The transducer configuration and connection format are part of the system design, alongside the intended coverage and deployment geometry.

Position and aim the cabinet according to the required listening area and the complete system design. Where several modules are combined, the array configuration and processing must be considered together. Keep the exact model reference with the equipment schedule so that the selected amplifier setup, mechanical accessories and connection arrangement remain consistent with this loudspeaker.

Features of GTX 10Pi

• Frequency Response (-10dB): 42 Hz – 20000 Hz
• Horizontal coverage angle: 70°
• Vertical coverage angle: 15°
• Amplification: Bi-Amp
• Recommended Amplifiers: XPS 16K, XPS 16KD
• Woofer: 2 x 10'' neo, 3.0'' v.c
• Input connectors: Screw Terminals

Specifications of GTX 10Pi