RCF GTX 10i Installation Line Array Module

RCF GTX 10i Installation Line Array Module

A two-way installation line array module with a one-hundred-and-ten-degree horizontal pattern and fifteen-degree vertical coverage. Dual ten-inch neodymium woofers work with a compression driver. Screw-terminal connections distinguish the installation design, which is intended for use with compatible external DSP amplification.

The specified frequency response at -10 dB is 42 Hz – 20000 Hz. Maximum sound pressure level at one metre is 143 dB. Nominal horizontal coverage is 110°. Nominal vertical coverage is 15°. Amplification is Bi-Amp. Nominal Impedance LF is 8 ohm. Nominal Impedance HF is 8 ohm. Recommended Amplifiers are XPS 16K, XPS 16KD.

Input connectors are Screw Terminals. Output connectors are Screw Terminals. The construction uses birch plywood. Hardware is Array fittings. Height is 337 mm / 13.27 inches. Width is 750 mm / 29.53 inches. Depth is 482.3 mm / 18.99 inches. The specified net weight is 32 kg.

This loudspeaker is intended to work within a system using compatible external amplification and processing. Match the amplifier routing and operating arrangement to the model rather than assuming that related cabinets use identical settings. The transducer configuration and connection format are part of the system design, alongside the intended coverage and deployment geometry.

Position and aim the cabinet according to the required listening area and the complete system design. Where several modules are combined, the array configuration and processing must be considered together. Keep the exact model reference with the equipment schedule so that the selected amplifier setup, mechanical accessories and connection arrangement remain consistent with this loudspeaker.

Features of GTX 10i

• Frequency Response (-10dB): 42 Hz – 20000 Hz
• Max SPL @ 1m: 143 dB
• Horizontal coverage angle: 110°
• Vertical coverage angle: 15°
• Amplification: Bi-Amp
• Recommended Amplifiers: XPS 16K, XPS 16KD
• Woofer: 2 x 10'' neo, 3.0'' v.c
• Input connectors: Screw Terminals

Specifications of GTX 10i